Set up a device
Setting up a device takes a couple of minutes. You’ll need the device code from the dashboard.
Get your device code
In the dashboard, go to Organization → Device and select Copy device code. It’s the same code you use for the Check-in Portal. See Devices.
Install the Community Portal
Install the Community Portal from the App Store on the iPad or iPhone, then open it.
Enter the device code
On Let’s Get Started, type the 10-digit code. The app checks it as soon as you type the last digit.
If you see Code Not Found, check the code in the dashboard and try again.
Name the device
On Name Device, give it a name you’ll recognize in the dashboard, like “Café iPad” or “Lobby Desk”, then select Next.
Allow access
On Access, select Location and Camera, and allow each one when your iPad or iPhone asks. A check mark shows next to each one you’ve allowed, and the app moves on once both are allowed.
- Location is needed to take card payments.
- Camera is for scanning tickets and codes.
The app also asks for Bluetooth (to find card readers) and your local network (to find printers) the first time it needs them. Allow those too.
Set up the label printer (iPad only)
On Printer Setup, the iPad looks for Brother label printers on your Wi-Fi. Select yours, choose the paper, and do a test print. Or select Skip Printer Setup and do it later.
iPhones skip this step, since printing is on iPad only. See Printers.
After Setting Up, the device opens to the home screen, and it shows in the dashboard under Organization → Device.
What to set up next
More than one organization
One device can serve more than one organization, like a campus café used by two churches. Each organization keeps its own device name and settings on the device.
To add another organization, select the building button at the top left of the home screen (or the organization’s name in Settings), then Add Organization. Enter that organization’s device code and a name for the device. That’s it: access and printers are already set up, so those steps are skipped. Select Cancel to go back to the organization you were using.
To switch, select the building button and pick the organization. The one in use has a check mark.
Each organization can only be added once. If you enter a code for an organization the device already has, you’ll see Already Added, with an option to switch to it.
Remove a device
To take an organization off this device, open Settings and select Remove Device, then Remove. You can add it again later with the device code. If it was the only organization, the app goes back to Let’s Get Started.
If someone removes the device in the dashboard instead, the app tells you with Device Removed and clears that organization from the device.
If a device is disabled
If someone turns a device off in the dashboard, the app shows Device Disabled with the device’s name, so you know which one to ask about. Your organization’s phone number and email show there too, so you can reach out.
- Check Again checks right away. If it’s still off, you’ll see when it was last checked. The app also checks on its own every couple of minutes, and opens again as soon as the device is turned back on.
- Switch Organization moves to another organization on this device, if it has one.
- Add Organization adds another organization with its device code.
Staff and guest use
The Community Portal is a staff app, but some screens face guests.
- Event Tickets can be set to Admin (staff sell tickets for people) or Guest-Facing (people get their own tickets). Choose it per device in Settings.
- The Guest Form kiosk (iPad only) locks the iPad on the guest form. To leave it, staff scan an Admin access code from an iPhone signed in to the same organization. On iPhone, select the shield button at the top of Plan a Visit, Guest Form, or Forms to show a one-time QR code. See Guest form.