Set up

Printers

Connect a Brother label printer and an Epson receipt printer to an iPad, test them, and open the cash drawer.

The Community Portal works with two kinds of printers, both over your Wi-Fi network:

PrinterWhat it’s forWhere you set it up
Label printerA Brother QL label printer, like the QL-820NWB or QL-1110NWB.Settings → Label Printer
Receipt printerAn Epson receipt printer for Point of Sale receipts. A cash drawer plugged into it opens on cash sales.Settings → Receipt Printer

The printer and the iPad need to be on the same network.

Printing is on iPad only. On an iPhone, the printer pages don’t show in Settings.

Label printer

Supported models are the Brother QL-710W, QL-720NW, QL-810W, QL-820NWB, QL-1110NWB, and QL-1115NWB. You can do this while setting up the device, or any time in Settings → Label Printer.

Pick the printer

The iPad scans your network and lists what it finds under Available Printers. Select yours.

If yours doesn’t show up, select + at the top. Enter a Name (like “QL-1110NWB”) and its IP Address, then select Add. You’ll find the IP address on the printer’s settings page or a printed network report.

Choose the paper

On Select Printer Paper, pick the label size loaded in the printer, like 62mm continuous length or 29mm x 90mm. It needs to match the roll, or labels print cut off.

Do a test print

During setup, the app asks Would you like to test the printer? Select Yes print. If it worked, choose Yes continue. If not, No try again or No pick another printer.

In Settings, select Test Print any time.

Under Current Printer, you’ll see the printer’s name and whether it’s Connected or Not reachable, plus its IP Address and Paper. Turn off Enable Printing for a station that shouldn’t print labels.

Receipt printer

Find the printer

Open Settings → Receipt Printer. The iPad searches for Epson receipt printers on your network and lists them under Available Printers. Select yours. It gets a check mark and moves to Current Printer.

If it isn’t listed, check that it’s on and on the same Wi-Fi, then select the refresh button at the top to search again.

Choose how receipts print

Under Receipts:

  • Print Receipts: turn off to stop printing receipts on this iPad.
  • Ask Before Printing: instead of always printing, the Sale Complete screen shows Print Receipt so the cashier can print one only when the guest wants it.

Test it

Select Test Print. If you have a cash drawer, select Open Cash Drawer to check it opens.

Current Printer shows whether the printer is Connected or Not reachable, with its IP Address.

After a sale

  • With Print Receipts on, the receipt prints when the sale is complete. With Ask Before Printing on, select Print Receipt instead. Either way, Print Another Receipt prints a second copy.
  • For cash sales, the cash drawer opens so you can make change.
  • You can reprint a receipt from Past orders. A reprint is marked REPRINT and doesn’t open the drawer.

The register’s status line shows Receipt Printer, Receipt Printing Off, or No Receipt Printer, so you can tell at a glance.

If printing fails

You’ll see Couldn’t Print (or Couldn’t Open Drawer) with what went wrong. Check that:

  • The printer is on, has paper or labels, and the cover is closed.
  • It’s on the same Wi-Fi as the iPad.
  • Current Printer says Connected. If it says Not reachable, the printer’s IP address may have changed: pick it again under Available Printers.
Ask your network admin to give each printer a fixed (reserved) IP address, so the iPad can always find it.